Your first steps
with VEEV ONE

How to use your VEEV ONE™
for the first time.

1. Make sure you have everything you need before starting: the device, a manufacturer-approved Charging Cable with a certified AC Power Adapter and your favorite VEEV ONE™ consumable.

2. Insert the VEEV ONE pod into your device with the magnetic connector for easy pod replacement. Choose from a range of VEEV ONE vape pod flavours.

3. Make sure your VEEV ONE™ is sufficiently charged. To unlock your device, press the button 5 times within 5 seconds. The status lights will ramp-up slowly to the level of battery charge. You can then use your device.
To lock it, repeat the same process. The status lights ramp-down slowly.

4. Take smooth puffs with normal drawing pressure. You can always change the VEEV ONE™ pod while your device is unlocked.

5. VEEV ONE has an autolock feature. If you don't use your device, after 10 minutes the device locks automatically.

Battery check.

With VEEV ONE™, you always know when it is time to charge. You can easily check the charge level of the device by briefly pressing the ON/OFF button: four white lights will turn on to indicate the status of the battery.

1. one white LED on = 25% - 1% charged
2. two white LEDs on = 25% - 50% charged
3. three white LEDs on = 50% - 75% charged
4. four white LEDs on = >75% charged

Don’t cover Airflow holes.

To ensure a proper aerosol delivery, air needs to be always able to flow through your device: when puffing, make sure that the two airflow holes, placed on the side of your device, are not occluded by your fingers or any other blockage.

How to change your VEEV ONE™ pod.

You can easily change the VEEV ONE™ pod while your VEEV ONE™ device is turned on, at any time and on the go. When a new VEEV ONE™ pod is inserted, status lights will turn on slowly to indicate that the device is ready for use. What’s more, there is no flavor aftertaste from one pod to another.